Question 1

How much does a commercial sign cost?

Accepted Answer

It depends on four things: the sign type, the size, whether it is illuminated, and how it has to be installed. A set of illuminated channel letters on a storefront and a monument sign with an engineered foundation are different projects with different budgets. Send us the address and a photo of the space and we will come back with a real number rather than a range that means nothing.

Question 2

Is a cabinet sign cheaper than channel letters?

Accepted Answer

Usually, yes. A cabinet puts the whole message on one illuminated face inside a single fabricated box, so there is far less fabrication than building each letter individually. Channel letters generally read as the more premium storefront sign. We will tell you honestly which one fits your building and your budget.

Question 3

How long does design and fabrication usually take?

Accepted Answer

Fabrication is rarely what sets the schedule. Landlord approval and the sign permit are, and those depend on the jurisdiction and how busy its plan review is. That is why we start the permit package the moment a design is approved, and why we give you a schedule based on your specific address instead of a generic turnaround time.

Question 4

What do you need from me for a quote?

Accepted Answer

Three things get you an accurate quote fast: the project address, a photo of the storefront or site as it looks today, and your logo or artwork in whatever format you have. If your landlord issued sign criteria with your lease, send that too. It often decides the answer before we start.

Question 5

Can you work from my franchise sign specification?

Accepted Answer

Yes. Send the franchise sign package with your quote request and we will build to it, including approved colors, letter construction, and illumination. If something in the spec conflicts with the local sign code, we will flag it before it becomes a permit problem.

Question 6

Do you handle sign permits?

Accepted Answer

Yes, and it is one of the main reasons customers call us. We check the sign code that applies at your address, prepare the drawing set and application, arrange sealed engineering where a ground sign requires it, submit to the city or county, and handle plan-review comments through to approval.

Question 7

Do I need a permit for my sign?

Accepted Answer

Most permanent exterior signs need one. Interior signage generally does not. Temporary banners often have their own separate rules about size and how long they can stay up. Requirements vary from one Texas city and county to the next, so the honest answer is that we check the code for your specific address as part of the site survey.

Question 8

Can you repair an existing illuminated sign?

Accepted Answer

Yes. Sign repair is a standalone service, not something we only do for signs we built. Most calls come down to failed LEDs or a power supply, a cracked or sun-faded face, or storm damage. Send a photo (a night photo if the problem is illumination) and the site address, and we will scope the repair.

Question 9

Can you convert my old fluorescent sign to LED?

Accepted Answer

Yes, and it is usually worth doing. An LED retrofit removes the ballast and lamp failures that keep putting the sign out, cuts the power draw, and gives a much more even face. In most cases the existing cabinet is reused.

Question 10

Can you reface a sign for a rebrand instead of replacing it?

Accepted Answer

Often, yes. If the cabinet or pylon structure is sound, new faces and an LED upgrade cost a fraction of a new sign and usually avoid a full permit cycle. Send a photo of the existing sign and we will tell you which way makes sense.

Question 11

Do you only work in Houston?

Accepted Answer

No. Houston is our home base, not our boundary. Our shop, our crews and our equipment are on Cypress Creek Parkway in northwest Houston, and we take commercial sign projects across Texas. Tell us the project address and we will confirm it and tell you which jurisdiction's sign code applies.

Question 12

Do you install signs you did not build?

Accepted Answer

Yes. We install signs fabricated elsewhere, including franchise sign packages shipped in from a national supplier, and we can handle the permit and the survey for those projects as well.

Straight answers about commercial signs.

What a commercial sign actually costs.

How a project moves, and what we need from you.

Which signs need a permit, and who files it.

Fixing, retrofitting, and refacing an existing sign.

Where we work and what we take on.

Still have a question about your building?

Straight answers about commercial signs.Straight answers about commercial signs.

What a commercial sign actually costs.What a commercial sign actually costs.